Hyundai I10 Se Connect Mpi: MOT pass rate and reliability data

The Hyundai I10 Se Connect Mpi passes its MOT first time more often than the average UK car, by 13.3 percentage points. These figures come from the DVSA's full year of anonymised MOT results, covering 5,414 individual Hyundai I10 Se Connect Mpi tests. Nothing here is an estimate or a survey.

The numbers

First-time pass rate90%
UK national average76.7%
Difference+13.3 points
Tests analysed5,414
Average mileage at test18,341 miles
Average year of manufacture2021
Reliability rank695 of 2,005 models

What this means if you are buying one

A 90% first-time pass rate means roughly 10 in every 100 Hyundai I10 Se Connect Mpis presented for MOT fail on the first attempt. That is better than average, so a well-kept example is a reasonably safe used buy. The average Hyundai I10 Se Connect Mpi tested had covered 18,341 miles and was built around 2021.

What this means at salvage auction

Pass rate is a proxy for what a car costs to keep on the road. The Hyundai I10 Se Connect Mpi sits 13.3 points above the national average, ranked 695 of 2,005 models. On one bought as repairable salvage, the mechanical side is less likely to spring surprises, so your repair estimate should hold up reasonably well.

Before you bid: run the lot through the analyzer, check the car's own record, check the mileage, decode the VIN, and if it carries a marker use the write-off value calculator. Or compare it against another model.

Looking at a specific Hyundai I10 Se Connect Mpi rather than the model in general? The free check covers its MOT and mileage history, and the full HPI report confirms the insurance write-off category, outstanding finance and whether it is recorded stolen, from licensed data for 5 credits. Already own one that has been damaged? Work out whether fixing it beats selling it with the repair or scrap calculator, and see recorded closing bids for damaged Hyundai I10 Se Connect Mpis at UK salvage auction.

Most common MOT failures on a Hyundai I10 Se Connect Mpi

  1. Seat belt retractor not functioning as intended, 1.3% of tests (34.56x the national rate for this defect)
  2. Seat belt not functioning as intended or of an incorrect type, 1.4% of tests (17.15x the national rate for this defect)
  3. Wiper blade missing or obviously not clearing the windscreen, 4.2% of tests (2.23x the national rate for this defect)
  4. A lamp missing, inoperative or in the case of a multiple light source more than 1/2 not functioning, 1.4% of tests
  5. A tyre seriously damaged, 1.3% of tests
  6. Windscreen washers not working or not providing sufficient fluid to clear the windscreen, 0.8% of tests
  7. A tyre cords visible or damaged, 0.7% of tests
  8. Steering rack gaiter or ball joint dust cover missing or no longer prevents the ingress of dirt etc, 0.6% of tests
  9. The aim of a headlamp is not within limits laid down in the requirements, 0.3% of tests
  10. a brake lining or pad worn below 1.5mm, 0.3% of tests

From 5,409 DVSA-tracked Hyundai I10 Se Connect Mpi tests, 2024. DVSA testers marked 3.3% of these flagged Hyundai I10 Se Connect Mpi defects as "dangerous", meaning the tester judged the car unsafe to drive away, against 5.11% nationally.

Most common MOT advisories on a Hyundai I10 Se Connect Mpi

An advisory doesn't fail the car - the tester flags it as worth watching, but it still passes. A different list from the failures above: what testers are noting on a Hyundai I10 Se Connect Mpi before it actually fails on it.

  1. Tyre tread depth not in accordance with the requirements, 12.8% of tests
  2. A tyre seriously damaged, 12.2% of tests, also fails
  3. a brake lining or pad worn below 1.5mm, 2.5% of tests, also fails
  4. Brake disc or drum significantly and obviously worn, 1.4% of tests
  5. Brake disc or drum excessively weakened, insecure or fractured, 1.3% of tests
  6. A suspension pin, bush or joint excessively worn, 0.6% of tests
  7. Number plate inscription missing or illegible, 0.5% of tests
  8. Significant brake effort recorded with no brake applied indicating a binding brake, 0.5% of tests
  9. A seat belt webbing or flexible stalk significantly stretched or weakened, 0.2% of tests
  10. Fluid leaking excessively and likely to harm the environment or to pose a safety risk to other road users, 0.2% of tests

From 5,409 DVSA-tracked Hyundai I10 Se Connect Mpi tests, 2024.

Hyundai I10 Se Connect Mpi pass rate by model year

From its 2020 to its 2021 model year, the Hyundai I10 Se Connect Mpi's first-time pass rate has fallen 4.8 points, from 93.1% to 88.3%, an unusual pattern where even its newest years fail more than its oldest. First-time pass rate for each Hyundai I10 Se Connect Mpi year:

Other Hyundai models

Models with a similar pass rate

If this car is a salvage or write-off

Embed this data

Run a site about the Hyundai I10 Se Connect Mpi? Embed the real DVSA pass-rate badge free, linked back to this page.

Hyundai I10 Se Connect Mpi MOT pass rate badge: 90%

<a href="https://www.salvageprophet.co.uk/mot/hyundai-i10-se-connect-mpi"><img src="https://www.salvageprophet.co.uk/badge/hyundai-i10-se-connect-mpi.svg" width="340" height="92" alt="Hyundai I10 Se Connect Mpi MOT Pass Rate: 90% - Salvage Prophet"></a>

Run a garage or parts site? Embed the Hyundai I10 Se Connect Mpi's top real failure reason instead, linked back here.

Hyundai I10 Se Connect Mpi most common MOT failure: Seat belt retractor not functioning as intended (1.3% of tests)

<a href="https://www.salvageprophet.co.uk/mot/hyundai-i10-se-connect-mpi"><img src="https://www.salvageprophet.co.uk/badge/failure/hyundai-i10-se-connect-mpi.svg" width="340" height="106" alt="Hyundai I10 Se Connect Mpi most common MOT failure: Seat belt retractor not functioning as intended (1.3% of tests) - Salvage Prophet"></a>

All 2,005 models ranked by MOT pass rate