Cupra Formentor V1 Tsi S-A: MOT pass rate and reliability data

The Cupra Formentor V1 Tsi S-A passes its MOT first time more often than the average UK car, by 15.4 percentage points. These figures come from the DVSA's full year of anonymised MOT results, covering 864 individual Cupra Formentor V1 Tsi S-A tests. Nothing here is an estimate or a survey.

The numbers

What this means if you are buying one

A 92.1% first-time pass rate means roughly 8 in every 100 Cupra Formentor V1 Tsi S-As presented for MOT fail on the first attempt. That is better than average, so a well-kept example is a reasonably safe used buy. The average Cupra Formentor V1 Tsi S-A tested had covered 27,224 miles and was built around 2021.

What this means at salvage auction

Pass rate is a proxy for what a car costs to keep on the road. The Cupra Formentor V1 Tsi S-A sits 15.4 points above the national average, ranked 381 of 2,005 models. On one bought as repairable salvage, the mechanical side is less likely to spring surprises, so your repair estimate should hold up reasonably well.

Before you bid: run the lot through the analyzer, check the car's own record, check the mileage, decode the VIN, and if it carries a marker use the write-off value calculator. Or compare it against another model.

Looking at a specific Cupra Formentor V1 Tsi S-A rather than the model in general? The free check covers its MOT and mileage history, and the full HPI report confirms the insurance write-off category, outstanding finance and whether it is recorded stolen, from licensed data for 5 credits. Already own one that has been damaged? Work out whether fixing it beats selling it with the repair or scrap calculator, and see recorded closing bids for damaged Cupra Formentor V1 Tsi S-As at UK salvage auction.

Most common MOT failures on a Cupra Formentor V1 Tsi S-A

1. A shock absorber damaged to the extent that it does not function or showing signs of severe leakage, 2.3% of tests (2.44x the national rate for this defect)
2. A tyre seriously damaged, 2.2% of tests
3. Tyre tread depth not in accordance with the requirements, 1.9% of tests
4. An SRS malfunction indicator lamp (MIL) indicates a system malfunction, 0.7% of tests (1.67x the national rate for this defect)
5. A suspension pin, bush or joint excessively worn, 0.7% of tests
6. Windscreen washers not working or not providing sufficient fluid to clear the windscreen, 0.6% of tests
7. An obligatory rear fog lamp missing, or a front or rear fog lamp inoperative or in the case of a multiple light source more than 1/2 not functioning, 0.5% of tests
8. a brake lining or pad worn below 1.5mm, 0.5% of tests
9. A rear registration plate lamp or light source missing or inoperative in the case of a single lamp or all lamps, 0.3% of tests
10. Wiper blade missing or obviously not clearing the windscreen, 0.3% of tests

From 863 DVSA-tracked Cupra Formentor V1 Tsi S-A tests, 2024. DVSA testers marked 4.19% of these flagged Cupra Formentor V1 Tsi S-A defects as "dangerous", meaning the tester judged the car unsafe to drive away, against 5.11% nationally.

Most common MOT advisories on a Cupra Formentor V1 Tsi S-A

An advisory doesn't fail the car - the tester flags it as worth watching, but it still passes. A different list from the failures above: what testers are noting on a Cupra Formentor V1 Tsi S-A before it actually fails on it.

1. A shock absorber damaged to the extent that it does not function or showing signs of severe leakage, 9.3% of tests (2.37x the national rate for this advisory), also fails
2. Tyre tread depth not in accordance with the requirements, 21.6% of tests, also fails
3. A tyre seriously damaged, 8.2% of tests, also fails
4. a brake lining or pad worn below 1.5mm, 6.6% of tests, also fails
5. Brake disc or drum excessively weakened, insecure or fractured, 4.8% of tests
6. A suspension pin, bush or joint excessively worn, 1.7% of tests, also fails
7. Brake disc or drum significantly and obviously worn, 0.7% of tests
8. Number plate inscription missing or illegible, 0.6% of tests
9. Brake fluid significantly below minimum mark, 0.2% of tests (2.97x the national rate for this advisory)
10. Excessive fluctuation in brake effort through each wheel revolution., 0.2% of tests

From 863 DVSA-tracked Cupra Formentor V1 Tsi S-A tests, 2024.

Other Cupra models

• Cupra Formentor V2 Tsi S-A - 91.4%
• Cupra Formentor Vz2 Tsi 4drive S-A - 90.3%
• Cupra Formentor V2 Phev S-A - 88.6%
• Cupra Formentor V2 Tsi - 91.1%
• Cupra Formentor V1 Phev S-A - 91.5%
• Cupra Formentor V1 Tsi - 91.3%

Models with a similar pass rate

• Audi Q7 S Line 50 Tdi Mhev Quat A - 92.1%
• Nissan Qashqai Prem Ed Dig-T Mhev Cvt - 92.1%
• Volkswagen T-Roc Se Tsi Evo S-A - 92.1%
• BMW X4 M Competition Auto - 92.1%
• Mercedes-Benz Gla 200 Amg Line Auto - 92.1%
• Kia Stonic 2 S-A - 92.1%

If this car is a salvage or write-off

• What does Cat N mean? Category N explained
• What does Cat S mean? Category S explained
• Cat S vs Cat N: the real differences
• Do you need an HPI check on a car you know is a write-off?

Embed this data

Run a site about the Cupra Formentor V1 Tsi S-A? Embed the real DVSA pass-rate badge free, linked back to this page.

<a href="https://www.salvageprophet.co.uk/mot/cupra-formentor-v1-tsi-s-a"><img src="https://www.salvageprophet.co.uk/badge/cupra-formentor-v1-tsi-s-a.svg" width="340" height="92" alt="Cupra Formentor V1 Tsi S-A MOT Pass Rate: 92.1% - Salvage Prophet"></a>

Run a garage or parts site? Embed the Cupra Formentor V1 Tsi S-A's top real failure reason instead, linked back here.

<a href="https://www.salvageprophet.co.uk/mot/cupra-formentor-v1-tsi-s-a"><img src="https://www.salvageprophet.co.uk/badge/failure/cupra-formentor-v1-tsi-s-a.svg" width="340" height="106" alt="Cupra Formentor V1 Tsi S-A most common MOT failure: A shock absorber damaged to the extent that it does not function or showing signs of severe leakage (2.3% of tests) - Salvage Prophet"></a>

All 2,005 models ranked by MOT pass rate