2016 BMW 428: MOT pass rate and reliability

83.6% of 2016 BMW 428s pass the MOT first time, measured across 219 DVSA tests on that model year alone. The average one had covered 57,172 miles.

How the 2016 compares

• Against all BMW 428s (84.6%, 2,839 tests): -1 points
• Against all 2016 cars (80.9%): +2.7 points
• National first-time pass rate, all cars and years: 77%

Every BMW 428 model year

Pass rates fall as cars age, so the only fair comparison for a 2016 car is other cars of the same age. The full run for the BMW 428:

What this means if you are buying a 2016 428

The 2016 sits close to the BMW 428 average, so there is no strong model-year signal either way. Judge the individual car on its own history. Check the exact car with the free MOT history checker before you buy, and run its VIN and mileage through our free VIN decoder and clocking check.

What a 10-year-old car fails on

A 2016 car is 10 years old now, and age drives the failure mix more than the badge does. Across all cars tested, these are the categories that actually cause failures:

• Lights and electrical: 10.36% of all cars tested
• Suspension: 8.65% of all cars tested
• Tyres: 6.23% of all cars tested
• Brakes: 6.1% of all cars tested
• Visibility: wipers, washers, glass: 4.65% of all cars tested
• Body, chassis and structure: 3.18% of all cars tested

That is around average, so condition and service history will tell you more than the odometer does. On a 2016 BMW 428 the average at test was 57,172 miles, so treat anything far above that as a car that has worked harder than its peers, and anything far below as one worth checking for the faults that come from standing still.

The strongest year for this model is 2014 at 84.8%, and the weakest in our data is 2016 at 83.6%. That 1.2 point spread across the model's life is why comparing a 2016 car against a newer one tells you very little.

Nearby model years

• 2014 BMW 428 - 84.8%
• 2015 BMW 428 - 84.7%

All BMW 428 MOT data · Every model